Line data Source code
1 : // SPDX-License-Identifier: GPL-2.0-only
2 : /*
3 : * mm/readahead.c - address_space-level file readahead.
4 : *
5 : * Copyright (C) 2002, Linus Torvalds
6 : *
7 : * 09Apr2002 Andrew Morton
8 : * Initial version.
9 : */
10 :
11 : /**
12 : * DOC: Readahead Overview
13 : *
14 : * Readahead is used to read content into the page cache before it is
15 : * explicitly requested by the application. Readahead only ever
16 : * attempts to read folios that are not yet in the page cache. If a
17 : * folio is present but not up-to-date, readahead will not try to read
18 : * it. In that case a simple ->read_folio() will be requested.
19 : *
20 : * Readahead is triggered when an application read request (whether a
21 : * system call or a page fault) finds that the requested folio is not in
22 : * the page cache, or that it is in the page cache and has the
23 : * readahead flag set. This flag indicates that the folio was read
24 : * as part of a previous readahead request and now that it has been
25 : * accessed, it is time for the next readahead.
26 : *
27 : * Each readahead request is partly synchronous read, and partly async
28 : * readahead. This is reflected in the struct file_ra_state which
29 : * contains ->size being the total number of pages, and ->async_size
30 : * which is the number of pages in the async section. The readahead
31 : * flag will be set on the first folio in this async section to trigger
32 : * a subsequent readahead. Once a series of sequential reads has been
33 : * established, there should be no need for a synchronous component and
34 : * all readahead request will be fully asynchronous.
35 : *
36 : * When either of the triggers causes a readahead, three numbers need
37 : * to be determined: the start of the region to read, the size of the
38 : * region, and the size of the async tail.
39 : *
40 : * The start of the region is simply the first page address at or after
41 : * the accessed address, which is not currently populated in the page
42 : * cache. This is found with a simple search in the page cache.
43 : *
44 : * The size of the async tail is determined by subtracting the size that
45 : * was explicitly requested from the determined request size, unless
46 : * this would be less than zero - then zero is used. NOTE THIS
47 : * CALCULATION IS WRONG WHEN THE START OF THE REGION IS NOT THE ACCESSED
48 : * PAGE. ALSO THIS CALCULATION IS NOT USED CONSISTENTLY.
49 : *
50 : * The size of the region is normally determined from the size of the
51 : * previous readahead which loaded the preceding pages. This may be
52 : * discovered from the struct file_ra_state for simple sequential reads,
53 : * or from examining the state of the page cache when multiple
54 : * sequential reads are interleaved. Specifically: where the readahead
55 : * was triggered by the readahead flag, the size of the previous
56 : * readahead is assumed to be the number of pages from the triggering
57 : * page to the start of the new readahead. In these cases, the size of
58 : * the previous readahead is scaled, often doubled, for the new
59 : * readahead, though see get_next_ra_size() for details.
60 : *
61 : * If the size of the previous read cannot be determined, the number of
62 : * preceding pages in the page cache is used to estimate the size of
63 : * a previous read. This estimate could easily be misled by random
64 : * reads being coincidentally adjacent, so it is ignored unless it is
65 : * larger than the current request, and it is not scaled up, unless it
66 : * is at the start of file.
67 : *
68 : * In general readahead is accelerated at the start of the file, as
69 : * reads from there are often sequential. There are other minor
70 : * adjustments to the readahead size in various special cases and these
71 : * are best discovered by reading the code.
72 : *
73 : * The above calculation, based on the previous readahead size,
74 : * determines the size of the readahead, to which any requested read
75 : * size may be added.
76 : *
77 : * Readahead requests are sent to the filesystem using the ->readahead()
78 : * address space operation, for which mpage_readahead() is a canonical
79 : * implementation. ->readahead() should normally initiate reads on all
80 : * folios, but may fail to read any or all folios without causing an I/O
81 : * error. The page cache reading code will issue a ->read_folio() request
82 : * for any folio which ->readahead() did not read, and only an error
83 : * from this will be final.
84 : *
85 : * ->readahead() will generally call readahead_folio() repeatedly to get
86 : * each folio from those prepared for readahead. It may fail to read a
87 : * folio by:
88 : *
89 : * * not calling readahead_folio() sufficiently many times, effectively
90 : * ignoring some folios, as might be appropriate if the path to
91 : * storage is congested.
92 : *
93 : * * failing to actually submit a read request for a given folio,
94 : * possibly due to insufficient resources, or
95 : *
96 : * * getting an error during subsequent processing of a request.
97 : *
98 : * In the last two cases, the folio should be unlocked by the filesystem
99 : * to indicate that the read attempt has failed. In the first case the
100 : * folio will be unlocked by the VFS.
101 : *
102 : * Those folios not in the final ``async_size`` of the request should be
103 : * considered to be important and ->readahead() should not fail them due
104 : * to congestion or temporary resource unavailability, but should wait
105 : * for necessary resources (e.g. memory or indexing information) to
106 : * become available. Folios in the final ``async_size`` may be
107 : * considered less urgent and failure to read them is more acceptable.
108 : * In this case it is best to use filemap_remove_folio() to remove the
109 : * folios from the page cache as is automatically done for folios that
110 : * were not fetched with readahead_folio(). This will allow a
111 : * subsequent synchronous readahead request to try them again. If they
112 : * are left in the page cache, then they will be read individually using
113 : * ->read_folio() which may be less efficient.
114 : */
115 :
116 : #include <linux/blkdev.h>
117 : #include <linux/kernel.h>
118 : #include <linux/dax.h>
119 : #include <linux/gfp.h>
120 : #include <linux/export.h>
121 : #include <linux/backing-dev.h>
122 : #include <linux/task_io_accounting_ops.h>
123 : #include <linux/pagemap.h>
124 : #include <linux/psi.h>
125 : #include <linux/syscalls.h>
126 : #include <linux/file.h>
127 : #include <linux/mm_inline.h>
128 : #include <linux/blk-cgroup.h>
129 : #include <linux/fadvise.h>
130 : #include <linux/sched/mm.h>
131 :
132 : #include "internal.h"
133 :
134 : /*
135 : * Initialise a struct file's readahead state. Assumes that the caller has
136 : * memset *ra to zero.
137 : */
138 : void
139 537668289 : file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping)
140 : {
141 537668289 : ra->ra_pages = inode_to_bdi(mapping->host)->ra_pages;
142 537667459 : ra->prev_pos = -1;
143 537667459 : }
144 : EXPORT_SYMBOL_GPL(file_ra_state_init);
145 :
146 16698123 : static void read_pages(struct readahead_control *rac)
147 : {
148 16698123 : const struct address_space_operations *aops = rac->mapping->a_ops;
149 16698123 : struct folio *folio;
150 16698123 : struct blk_plug plug;
151 :
152 16698123 : if (!readahead_count(rac))
153 7264318 : return;
154 :
155 9433805 : if (unlikely(rac->_workingset))
156 : psi_memstall_enter(&rac->_pflags);
157 9433805 : blk_start_plug(&plug);
158 :
159 9433789 : if (aops->readahead) {
160 9433789 : aops->readahead(rac);
161 : /*
162 : * Clean up the remaining folios. The sizes in ->ra
163 : * may be used to size the next readahead, so make sure
164 : * they accurately reflect what happened.
165 : */
166 9433918 : while ((folio = readahead_folio(rac)) != NULL) {
167 129 : unsigned long nr = folio_nr_pages(folio);
168 :
169 129 : folio_get(folio);
170 129 : rac->ra->size -= nr;
171 129 : if (rac->ra->async_size >= nr) {
172 44 : rac->ra->async_size -= nr;
173 44 : filemap_remove_folio(folio);
174 : }
175 129 : folio_unlock(folio);
176 129 : folio_put(folio);
177 : }
178 : } else {
179 0 : while ((folio = readahead_folio(rac)) != NULL)
180 0 : aops->read_folio(rac->file, folio);
181 : }
182 :
183 9433811 : blk_finish_plug(&plug);
184 9433828 : if (unlikely(rac->_workingset))
185 : psi_memstall_leave(&rac->_pflags);
186 9433828 : rac->_workingset = false;
187 :
188 9433828 : BUG_ON(readahead_count(rac));
189 : }
190 :
191 : /**
192 : * page_cache_ra_unbounded - Start unchecked readahead.
193 : * @ractl: Readahead control.
194 : * @nr_to_read: The number of pages to read.
195 : * @lookahead_size: Where to start the next readahead.
196 : *
197 : * This function is for filesystems to call when they want to start
198 : * readahead beyond a file's stated i_size. This is almost certainly
199 : * not the function you want to call. Use page_cache_async_readahead()
200 : * or page_cache_sync_readahead() instead.
201 : *
202 : * Context: File is referenced by caller. Mutexes may be held by caller.
203 : * May sleep, but will not reenter filesystem to reclaim memory.
204 : */
205 6879057 : void page_cache_ra_unbounded(struct readahead_control *ractl,
206 : unsigned long nr_to_read, unsigned long lookahead_size)
207 : {
208 6879057 : struct address_space *mapping = ractl->mapping;
209 6879057 : unsigned long index = readahead_index(ractl);
210 6879057 : gfp_t gfp_mask = readahead_gfp_mask(mapping);
211 6879057 : unsigned long i;
212 :
213 : /*
214 : * Partway through the readahead operation, we will have added
215 : * locked pages to the page cache, but will not yet have submitted
216 : * them for I/O. Adding another page may need to allocate memory,
217 : * which can trigger memory reclaim. Telling the VM we're in
218 : * the middle of a filesystem operation will cause it to not
219 : * touch file-backed pages, preventing a deadlock. Most (all?)
220 : * filesystems already specify __GFP_NOFS in their mapping's
221 : * gfp_mask, but let's be explicit here.
222 : */
223 6879057 : unsigned int nofs = memalloc_nofs_save();
224 :
225 6879057 : filemap_invalidate_lock_shared(mapping);
226 : /*
227 : * Preallocate as many pages as we will need.
228 : */
229 38482706 : for (i = 0; i < nr_to_read; i++) {
230 24724602 : struct folio *folio = xa_load(&mapping->i_pages, index + i);
231 :
232 24724517 : if (folio && !xa_is_value(folio)) {
233 : /*
234 : * Page already present? Kick off the current batch
235 : * of contiguous pages before continuing with the
236 : * next batch. This page may be the one we would
237 : * have intended to mark as Readahead, but we don't
238 : * have a stable reference to this page, and it's
239 : * not worth getting one just for that.
240 : */
241 6459101 : read_pages(ractl);
242 6459102 : ractl->_index++;
243 6459102 : i = ractl->_index + ractl->_nr_pages - index - 1;
244 6459102 : continue;
245 : }
246 :
247 18265416 : folio = filemap_alloc_folio(gfp_mask, 0);
248 18265379 : if (!folio)
249 : break;
250 18265296 : if (filemap_add_folio(mapping, folio, index + i,
251 : gfp_mask) < 0) {
252 766 : folio_put(folio);
253 766 : read_pages(ractl);
254 766 : ractl->_index++;
255 766 : i = ractl->_index + ractl->_nr_pages - index - 1;
256 766 : continue;
257 : }
258 18264664 : if (i == nr_to_read - lookahead_size)
259 445231 : folio_set_readahead(folio);
260 18264671 : ractl->_workingset |= folio_test_workingset(folio);
261 18264675 : ractl->_nr_pages++;
262 : }
263 :
264 : /*
265 : * Now start the IO. We ignore I/O errors - if the folio is not
266 : * uptodate then the caller will launch read_folio again, and
267 : * will then handle the error.
268 : */
269 6879130 : read_pages(ractl);
270 6879136 : filemap_invalidate_unlock_shared(mapping);
271 6879134 : memalloc_nofs_restore(nofs);
272 6879134 : }
273 : EXPORT_SYMBOL_GPL(page_cache_ra_unbounded);
274 :
275 : /*
276 : * do_page_cache_ra() actually reads a chunk of disk. It allocates
277 : * the pages first, then submits them for I/O. This avoids the very bad
278 : * behaviour which would occur if page allocations are causing VM writeback.
279 : * We really don't want to intermingle reads and writes like that.
280 : */
281 6885839 : static void do_page_cache_ra(struct readahead_control *ractl,
282 : unsigned long nr_to_read, unsigned long lookahead_size)
283 : {
284 6885839 : struct inode *inode = ractl->mapping->host;
285 6885839 : unsigned long index = readahead_index(ractl);
286 6885839 : loff_t isize = i_size_read(inode);
287 6885839 : pgoff_t end_index; /* The last page we want to read */
288 :
289 6885839 : if (isize == 0)
290 : return;
291 :
292 6885839 : end_index = (isize - 1) >> PAGE_SHIFT;
293 6885839 : if (index > end_index)
294 : return;
295 : /* Don't read past the page containing the last byte of the file */
296 6879077 : if (nr_to_read > end_index - index)
297 1465220 : nr_to_read = end_index - index + 1;
298 :
299 6879077 : page_cache_ra_unbounded(ractl, nr_to_read, lookahead_size);
300 : }
301 :
302 : /*
303 : * Chunk the readahead into 2 megabyte units, so that we don't pin too much
304 : * memory at once.
305 : */
306 798405 : void force_page_cache_ra(struct readahead_control *ractl,
307 : unsigned long nr_to_read)
308 : {
309 798405 : struct address_space *mapping = ractl->mapping;
310 798405 : struct file_ra_state *ra = ractl->ra;
311 798405 : struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
312 798402 : unsigned long max_pages, index;
313 :
314 798402 : if (unlikely(!mapping->a_ops->read_folio && !mapping->a_ops->readahead))
315 : return;
316 :
317 : /*
318 : * If the request exceeds the readahead window, allow the read to
319 : * be up to the optimal hardware IO size
320 : */
321 798402 : index = readahead_index(ractl);
322 798402 : max_pages = max_t(unsigned long, bdi->io_pages, ra->ra_pages);
323 798402 : nr_to_read = min_t(unsigned long, nr_to_read, max_pages);
324 1596822 : while (nr_to_read) {
325 798402 : unsigned long this_chunk = (2 * 1024 * 1024) / PAGE_SIZE;
326 :
327 798402 : if (this_chunk > nr_to_read)
328 798408 : this_chunk = nr_to_read;
329 798402 : ractl->_index = index;
330 798402 : do_page_cache_ra(ractl, this_chunk, 0);
331 :
332 798420 : index += this_chunk;
333 798420 : nr_to_read -= this_chunk;
334 : }
335 : }
336 :
337 : /*
338 : * Set the initial window size, round to next power of 2 and square
339 : * for small size, x 4 for medium, and x 2 for large
340 : * for 128k (32 page) max ra
341 : * 1-2 page = 16k, 3-4 page 32k, 5-8 page = 64k, > 8 page = 128k initial
342 : */
343 1446388 : static unsigned long get_init_ra_size(unsigned long size, unsigned long max)
344 : {
345 1446388 : unsigned long newsize = roundup_pow_of_two(size);
346 :
347 1446388 : if (newsize <= max / 32)
348 278252 : newsize = newsize * 4;
349 1168136 : else if (newsize <= max / 4)
350 1000950 : newsize = newsize * 2;
351 : else
352 : newsize = max;
353 :
354 1446388 : return newsize;
355 : }
356 :
357 : /*
358 : * Get the previous window size, ramp it up, and
359 : * return it as the new window size.
360 : */
361 : static unsigned long get_next_ra_size(struct file_ra_state *ra,
362 : unsigned long max)
363 : {
364 412467 : unsigned long cur = ra->size;
365 :
366 412467 : if (cur < max / 16)
367 192 : return 4 * cur;
368 412275 : if (cur <= max / 2)
369 250036 : return 2 * cur;
370 : return max;
371 : }
372 :
373 : /*
374 : * On-demand readahead design.
375 : *
376 : * The fields in struct file_ra_state represent the most-recently-executed
377 : * readahead attempt:
378 : *
379 : * |<----- async_size ---------|
380 : * |------------------- size -------------------->|
381 : * |==================#===========================|
382 : * ^start ^page marked with PG_readahead
383 : *
384 : * To overlap application thinking time and disk I/O time, we do
385 : * `readahead pipelining': Do not wait until the application consumed all
386 : * readahead pages and stalled on the missing page at readahead_index;
387 : * Instead, submit an asynchronous readahead I/O as soon as there are
388 : * only async_size pages left in the readahead window. Normally async_size
389 : * will be equal to size, for maximum pipelining.
390 : *
391 : * In interleaved sequential reads, concurrent streams on the same fd can
392 : * be invalidating each other's readahead state. So we flag the new readahead
393 : * page at (start+size-async_size) with PG_readahead, and use it as readahead
394 : * indicator. The flag won't be set on already cached pages, to avoid the
395 : * readahead-for-nothing fuss, saving pointless page cache lookups.
396 : *
397 : * prev_pos tracks the last visited byte in the _previous_ read request.
398 : * It should be maintained by the caller, and will be used for detecting
399 : * small random reads. Note that the readahead algorithm checks loosely
400 : * for sequential patterns. Hence interleaved reads might be served as
401 : * sequential ones.
402 : *
403 : * There is a special-case: if the first page which the application tries to
404 : * read happens to be the first page of the file, it is assumed that a linear
405 : * read is about to happen and the window is immediately set to the initial size
406 : * based on I/O request size and the max_readahead.
407 : *
408 : * The code ramps up the readahead size aggressively at first, but slow down as
409 : * it approaches max_readhead.
410 : */
411 :
412 : /*
413 : * Count contiguously cached pages from @index-1 to @index-@max,
414 : * this count is a conservative estimation of
415 : * - length of the sequential read sequence, or
416 : * - thrashing threshold in memory tight systems
417 : */
418 4472125 : static pgoff_t count_history_pages(struct address_space *mapping,
419 : pgoff_t index, unsigned long max)
420 : {
421 4472125 : pgoff_t head;
422 :
423 4472125 : rcu_read_lock();
424 4472129 : head = page_cache_prev_miss(mapping, index - 1, max);
425 4472127 : rcu_read_unlock();
426 :
427 4472131 : return index - 1 - head;
428 : }
429 :
430 : /*
431 : * page cache context based readahead
432 : */
433 4472142 : static int try_context_readahead(struct address_space *mapping,
434 : struct file_ra_state *ra,
435 : pgoff_t index,
436 : unsigned long req_size,
437 : unsigned long max)
438 : {
439 4472142 : pgoff_t size;
440 :
441 4472142 : size = count_history_pages(mapping, index, max);
442 :
443 : /*
444 : * not enough history pages:
445 : * it could be a random read
446 : */
447 4472118 : if (size <= req_size)
448 : return 0;
449 :
450 : /*
451 : * starts from beginning of file:
452 : * it is a strong indication of long-run stream (or whole-file-read)
453 : */
454 45814 : if (size >= index)
455 13906 : size *= 2;
456 :
457 45814 : ra->start = index;
458 45814 : ra->size = min(size + req_size, max);
459 45814 : ra->async_size = 1;
460 :
461 45814 : return 1;
462 : }
463 :
464 13601230 : static inline int ra_alloc_folio(struct readahead_control *ractl, pgoff_t index,
465 : pgoff_t mark, unsigned int order, gfp_t gfp)
466 : {
467 13601230 : int err;
468 13601230 : struct folio *folio = filemap_alloc_folio(gfp, order);
469 :
470 13601188 : if (!folio)
471 : return -ENOMEM;
472 13601121 : mark = round_up(mark, 1UL << order);
473 13601121 : if (index == mark)
474 1115019 : folio_set_readahead(folio);
475 13601121 : err = filemap_add_folio(ractl->mapping, folio, index, gfp);
476 13601182 : if (err) {
477 1439269 : folio_put(folio);
478 1439269 : return err;
479 : }
480 :
481 12161913 : ractl->_nr_pages += 1UL << order;
482 12161913 : ractl->_workingset |= folio_test_workingset(folio);
483 12161923 : return 0;
484 : }
485 :
486 3580928 : void page_cache_ra_order(struct readahead_control *ractl,
487 : struct file_ra_state *ra, unsigned int new_order)
488 : {
489 3580928 : struct address_space *mapping = ractl->mapping;
490 3580928 : pgoff_t index = readahead_index(ractl);
491 3580928 : pgoff_t limit = (i_size_read(mapping->host) - 1) >> PAGE_SHIFT;
492 3580928 : pgoff_t mark = index + ra->size - ra->async_size;
493 3580928 : int err = 0;
494 3580928 : gfp_t gfp = readahead_gfp_mask(mapping);
495 :
496 7161856 : if (!mapping_large_folio_support(mapping) || ra->size < 4)
497 221781 : goto fallback;
498 :
499 3359147 : limit = min(limit, index + ra->size - 1);
500 :
501 3359147 : if (new_order < MAX_PAGECACHE_ORDER) {
502 3359149 : new_order += 2;
503 3359149 : if (new_order > MAX_PAGECACHE_ORDER)
504 0 : new_order = MAX_PAGECACHE_ORDER;
505 3430119 : while ((1 << new_order) > ra->size)
506 70970 : new_order--;
507 : }
508 :
509 3359147 : filemap_invalidate_lock_shared(mapping);
510 15520993 : while (index <= limit) {
511 13601169 : unsigned int order = new_order;
512 :
513 : /* Align with smaller pages if needed */
514 13601169 : if (index & ((1UL << order) - 1)) {
515 4189084 : order = __ffs(index);
516 4189084 : if (order == 1)
517 1377823 : order = 0;
518 : }
519 : /* Don't allocate pages past EOF */
520 15067301 : while (index + (1UL << order) - 1 > limit) {
521 1466132 : if (--order == 1)
522 : order = 0;
523 : }
524 13601169 : err = ra_alloc_folio(ractl, index, mark, order, gfp);
525 13601181 : if (err)
526 : break;
527 : index += 1UL << order;
528 : }
529 :
530 3359160 : if (index > limit) {
531 1919824 : ra->size += index - limit - 1;
532 1919824 : ra->async_size += index - limit - 1;
533 : }
534 :
535 3359160 : read_pages(ractl);
536 3359159 : filemap_invalidate_unlock_shared(mapping);
537 :
538 : /*
539 : * If there were already pages in the page cache, then we may have
540 : * left some gaps. Let the regular readahead code take care of this
541 : * situation.
542 : */
543 3359161 : if (!err)
544 : return;
545 1439336 : fallback:
546 1661117 : do_page_cache_ra(ractl, ra->size, ra->async_size);
547 : }
548 :
549 : /*
550 : * A minimal readahead algorithm for trivial sequential/random reads.
551 : */
552 6306435 : static void ondemand_readahead(struct readahead_control *ractl,
553 : struct folio *folio, unsigned long req_size)
554 : {
555 6306435 : struct backing_dev_info *bdi = inode_to_bdi(ractl->mapping->host);
556 6306444 : struct file_ra_state *ra = ractl->ra;
557 6306444 : unsigned long max_pages = ra->ra_pages;
558 6306444 : unsigned long add_pages;
559 6306444 : pgoff_t index = readahead_index(ractl);
560 6306444 : pgoff_t expected, prev_index;
561 6306444 : unsigned int order = folio ? folio_order(folio) : 0;
562 :
563 : /*
564 : * If the request exceeds the readahead window, allow the read to
565 : * be up to the optimal hardware IO size
566 : */
567 6306481 : if (req_size > max_pages && bdi->io_pages > max_pages)
568 16803 : max_pages = min(req_size, bdi->io_pages);
569 :
570 : /*
571 : * start of file
572 : */
573 6306481 : if (!index)
574 463938 : goto initial_readahead;
575 :
576 : /*
577 : * It's the expected callback index, assume sequential access.
578 : * Ramp up sizes, and push forward the readahead window.
579 : */
580 5842543 : expected = round_up(ra->start + ra->size - ra->async_size,
581 : 1UL << order);
582 5842543 : if (index == expected || index == (ra->start + ra->size)) {
583 246651 : ra->start += ra->size;
584 246651 : ra->size = get_next_ra_size(ra, max_pages);
585 246651 : ra->async_size = ra->size;
586 246651 : goto readit;
587 : }
588 :
589 : /*
590 : * Hit a marked folio without valid readahead state.
591 : * E.g. interleaved reads.
592 : * Query the pagecache for async_size, which normally equals to
593 : * readahead size. Ramp it up and use it as the new readahead size.
594 : */
595 5595892 : if (folio) {
596 141312 : pgoff_t start;
597 :
598 141312 : rcu_read_lock();
599 141312 : start = page_cache_next_miss(ractl->mapping, index + 1,
600 : max_pages);
601 141306 : rcu_read_unlock();
602 :
603 141305 : if (!start || start - index > max_pages)
604 : return;
605 :
606 141305 : ra->start = start;
607 141305 : ra->size = start - index; /* old async_size */
608 141305 : ra->size += req_size;
609 141305 : ra->size = get_next_ra_size(ra, max_pages);
610 141305 : ra->async_size = ra->size;
611 141305 : goto readit;
612 : }
613 :
614 : /*
615 : * oversize read
616 : */
617 5454580 : if (req_size > max_pages)
618 991 : goto initial_readahead;
619 :
620 : /*
621 : * sequential cache miss
622 : * trivial case: (index - prev_index) == 1
623 : * unaligned reads: (index - prev_index) == 0
624 : */
625 5453589 : prev_index = (unsigned long long)ra->prev_pos >> PAGE_SHIFT;
626 5453589 : if (index - prev_index <= 1UL)
627 981452 : goto initial_readahead;
628 :
629 : /*
630 : * Query the page cache and look for the traces(cached history pages)
631 : * that a sequential stream would leave behind.
632 : */
633 4472137 : if (try_context_readahead(ractl->mapping, ra, index, req_size,
634 : max_pages))
635 45814 : goto readit;
636 :
637 : /*
638 : * standalone, small random read
639 : * Read as is, and do not pollute the readahead state.
640 : */
641 4426291 : do_page_cache_ra(ractl, req_size, 0);
642 4426291 : return;
643 :
644 1446381 : initial_readahead:
645 1446381 : ra->start = index;
646 1446381 : ra->size = get_init_ra_size(req_size, max_pages);
647 1446381 : ra->async_size = ra->size > req_size ? ra->size - req_size : ra->size;
648 :
649 1880151 : readit:
650 : /*
651 : * Will this read hit the readahead marker made by itself?
652 : * If so, trigger the readahead marker hit now, and merge
653 : * the resulted next readahead window into the current one.
654 : * Take care of maximum IO pages as above.
655 : */
656 1880151 : if (index == ra->start && ra->size == ra->async_size) {
657 24511 : add_pages = get_next_ra_size(ra, max_pages);
658 24511 : if (ra->size + add_pages <= max_pages) {
659 9911 : ra->async_size = add_pages;
660 9911 : ra->size += add_pages;
661 : } else {
662 14600 : ra->size = max_pages;
663 14600 : ra->async_size = max_pages >> 1;
664 : }
665 : }
666 :
667 1880151 : ractl->_index = ra->start;
668 1880151 : page_cache_ra_order(ractl, ra, order);
669 : }
670 :
671 6785929 : void page_cache_sync_ra(struct readahead_control *ractl,
672 : unsigned long req_count)
673 : {
674 6785929 : bool do_forced_ra = ractl->file && (ractl->file->f_mode & FMODE_RANDOM);
675 :
676 : /*
677 : * Even if readahead is disabled, issue this request as readahead
678 : * as we'll need it to satisfy the requested range. The forced
679 : * readahead will do the right thing and limit the read to just the
680 : * requested range, which we'll set to 1 page for this case.
681 : */
682 6785929 : if (!ractl->ra->ra_pages || blk_cgroup_congested()) {
683 16 : if (!ractl->file)
684 : return;
685 : req_count = 1;
686 : do_forced_ra = true;
687 : }
688 :
689 : /* be dumb */
690 6785882 : if (do_forced_ra) {
691 798437 : force_page_cache_ra(ractl, req_count);
692 798437 : return;
693 : }
694 :
695 5987455 : ondemand_readahead(ractl, NULL, req_count);
696 : }
697 : EXPORT_SYMBOL_GPL(page_cache_sync_ra);
698 :
699 319845 : void page_cache_async_ra(struct readahead_control *ractl,
700 : struct folio *folio, unsigned long req_count)
701 : {
702 : /* no readahead */
703 319845 : if (!ractl->ra->ra_pages)
704 : return;
705 :
706 : /*
707 : * Same bit is used for PG_readahead and PG_reclaim.
708 : */
709 319843 : if (folio_test_writeback(folio))
710 : return;
711 :
712 318964 : folio_clear_readahead(folio);
713 :
714 318962 : if (blk_cgroup_congested())
715 : return;
716 :
717 318958 : ondemand_readahead(ractl, folio, req_count);
718 : }
719 : EXPORT_SYMBOL_GPL(page_cache_async_ra);
720 :
721 0 : ssize_t ksys_readahead(int fd, loff_t offset, size_t count)
722 : {
723 0 : ssize_t ret;
724 0 : struct fd f;
725 :
726 0 : ret = -EBADF;
727 0 : f = fdget(fd);
728 0 : if (!f.file || !(f.file->f_mode & FMODE_READ))
729 0 : goto out;
730 :
731 : /*
732 : * The readahead() syscall is intended to run only on files
733 : * that can execute readahead. If readahead is not possible
734 : * on this file, then we must return -EINVAL.
735 : */
736 0 : ret = -EINVAL;
737 0 : if (!f.file->f_mapping || !f.file->f_mapping->a_ops ||
738 0 : !S_ISREG(file_inode(f.file)->i_mode))
739 0 : goto out;
740 :
741 0 : ret = vfs_fadvise(f.file, offset, count, POSIX_FADV_WILLNEED);
742 0 : out:
743 0 : fdput(f);
744 0 : return ret;
745 : }
746 :
747 0 : SYSCALL_DEFINE3(readahead, int, fd, loff_t, offset, size_t, count)
748 : {
749 0 : return ksys_readahead(fd, offset, count);
750 : }
751 :
752 : #if defined(CONFIG_COMPAT) && defined(__ARCH_WANT_COMPAT_READAHEAD)
753 : COMPAT_SYSCALL_DEFINE4(readahead, int, fd, compat_arg_u64_dual(offset), size_t, count)
754 : {
755 : return ksys_readahead(fd, compat_arg_u64_glue(offset), count);
756 : }
757 : #endif
758 :
759 : /**
760 : * readahead_expand - Expand a readahead request
761 : * @ractl: The request to be expanded
762 : * @new_start: The revised start
763 : * @new_len: The revised size of the request
764 : *
765 : * Attempt to expand a readahead request outwards from the current size to the
766 : * specified size by inserting locked pages before and after the current window
767 : * to increase the size to the new window. This may involve the insertion of
768 : * THPs, in which case the window may get expanded even beyond what was
769 : * requested.
770 : *
771 : * The algorithm will stop if it encounters a conflicting page already in the
772 : * pagecache and leave a smaller expansion than requested.
773 : *
774 : * The caller must check for this by examining the revised @ractl object for a
775 : * different expansion than was requested.
776 : */
777 0 : void readahead_expand(struct readahead_control *ractl,
778 : loff_t new_start, size_t new_len)
779 : {
780 0 : struct address_space *mapping = ractl->mapping;
781 0 : struct file_ra_state *ra = ractl->ra;
782 0 : pgoff_t new_index, new_nr_pages;
783 0 : gfp_t gfp_mask = readahead_gfp_mask(mapping);
784 :
785 0 : new_index = new_start / PAGE_SIZE;
786 :
787 : /* Expand the leading edge downwards */
788 0 : while (ractl->_index > new_index) {
789 0 : unsigned long index = ractl->_index - 1;
790 0 : struct folio *folio = xa_load(&mapping->i_pages, index);
791 :
792 0 : if (folio && !xa_is_value(folio))
793 : return; /* Folio apparently present */
794 :
795 0 : folio = filemap_alloc_folio(gfp_mask, 0);
796 0 : if (!folio)
797 : return;
798 0 : if (filemap_add_folio(mapping, folio, index, gfp_mask) < 0) {
799 0 : folio_put(folio);
800 0 : return;
801 : }
802 0 : if (unlikely(folio_test_workingset(folio)) &&
803 0 : !ractl->_workingset) {
804 0 : ractl->_workingset = true;
805 0 : psi_memstall_enter(&ractl->_pflags);
806 : }
807 0 : ractl->_nr_pages++;
808 0 : ractl->_index = folio->index;
809 : }
810 :
811 0 : new_len += new_start - readahead_pos(ractl);
812 0 : new_nr_pages = DIV_ROUND_UP(new_len, PAGE_SIZE);
813 :
814 : /* Expand the trailing edge upwards */
815 0 : while (ractl->_nr_pages < new_nr_pages) {
816 0 : unsigned long index = ractl->_index + ractl->_nr_pages;
817 0 : struct folio *folio = xa_load(&mapping->i_pages, index);
818 :
819 0 : if (folio && !xa_is_value(folio))
820 : return; /* Folio apparently present */
821 :
822 0 : folio = filemap_alloc_folio(gfp_mask, 0);
823 0 : if (!folio)
824 : return;
825 0 : if (filemap_add_folio(mapping, folio, index, gfp_mask) < 0) {
826 0 : folio_put(folio);
827 0 : return;
828 : }
829 0 : if (unlikely(folio_test_workingset(folio)) &&
830 0 : !ractl->_workingset) {
831 0 : ractl->_workingset = true;
832 0 : psi_memstall_enter(&ractl->_pflags);
833 : }
834 0 : ractl->_nr_pages++;
835 0 : if (ra) {
836 0 : ra->size++;
837 0 : ra->async_size++;
838 : }
839 : }
840 : }
841 : EXPORT_SYMBOL(readahead_expand);
|
